Welcome Jiangsu Haohua Industry Group Website Map

5CT N80 Petroleum Casing Pipe

Product Categary:

5CT Casing Pipes

Main Feature:

5CT N80 Petroleum Casing Pipe Standards: 5CT Specification for Casing and Tubing ISO 11960:2004Petroleum and natural gas industries-Steel pipes for use as casingtubing for wells Sizes: Outside Diameter: 1.660-30 Grades: H40J55K55

product description

5CT N80 Petroleum Casing Pipe
Standards:

5CT Specification for Casing and Tubing

ISO 11960:2004,Petroleum and natural gas industries-Steel pipes for use as casing tubing for wells
Sizes: Outside Diameter: 1.660"-30"
Grades: H40,J55,K55,N80,N80Q,L80,C90,C95,T95,P110,Q125,SS95,SS110,9%CR,13%CR
Some of the OCTG casing tubing available for your company’s requirements include:
General drill pipes,casing tubing conforming to  standards for oil field and deep well drilling
 H40 casing tubing – general purpose pipes conforming to  specification 5CT
 J55 general purpose pipes for casing tubing applications,similar to specification K55 with lower minimum tensile strength conforming to  specification 5CT
 K55 general purpose pipes used primarily in casings conforming to  specification 5CT
 L80 casing tubing conforming to  specification 5CT with a controlled yield strength with hardness test requirement of 23 HRC maximum; usually used in wells with sour (H2S) environments or deep sour wells
 N80 or N80 Q&T (Quench and Tempered) – general purpose pipe manufactured to  specification 5CT
 Normalized N80 – lower-cost alternative to standard Q&T N80; pipe walls less than 0.500 inch; inspections,testing and dimensions are in accordance with  5CT for grade N80. Charpy v-notch impact test absorbed energy results conform to  SR16 and are lower Q&T N80
 C90 – an  controlled yield strength grade (25.4 HRC maximum) generally used in sour condensate wells; with required extensive hardness testing,SSCC testing per NACE Standard TM-0177-Method A; minimum threshold stress required is 80% of specified minimum yield strength
 C95 – same strength range as T95 and U. S. Steel C95,but without a hardness requirement; generally not used in sour wells
 T95 –  controlled yield strength grade (25.4 HRC maximum),the same as  C95 and U. S. Steel C95; generally for use in sour condensate wells; extensive hardness testing is required including SSCC testing per NACE Standard TM-0177-Method A; minimum threshold stress required is 80% of specified minimum yield strength
 P110 – generally used in deep wells; this grade is not suitable for most sour condensate wells
 Q125 –  grade for deep well service,generally not for use in sour condensate wells; quadrant hardness testing is required (no specified hardness limits other than the variation between readings); impact testing required for each heat and/or lot; typically EMI and UT NDT inspections are required
Connections:
STC (short round thread casing)
LTC (long round thread casing)
BTC (buttress thread casing)
XL (extreme-line casing)
Premium Connections
VAM,VAMTOP,NEW VAM
And almost any premium & gas tight connection
Length: Range 1,Range 2 & Range 3:
Applicable Tests: See our Standard Inspection Scope
Protection:
External bare and uncoated or externally coated with black/ transparent anti rust Mill varnish
Plastic or Metal Pin and Box Protectors.
Internal plastic coating or sleeves.
Mill Test Certificates:
Issued in accordance with  Specification 5CT Eighth Edition
Additional Third Party Inspection can also be performed on request.